How to use Brava

Four actions to know: set off, stop, light, recharge. This user guide follows the manufacturer’s instructions.

Attach the alarm

The carabiner clips onto a bunch of keys, a bag handle, a strap or a belt. Place the alarm where your hand finds it straight away.

Set off the siren

Pull the carabiner with a sharp tug to separate it from the casing. The siren and the flashing light go off at once.

According to the manufacturer, the siren reaches 130 dB and can sound for up to 1 hour continuously.

Stop the siren

Put the carabiner back in place in the casing. The siren and the flashing light stop.

Use the light

The light button is on the side.

  • One press: the light comes on.
  • A second press: it flashes.
  • A third press: it goes off.

According to the manufacturer: 40 lumens, up to 5 hours of light.

Recharge

The USB-C port is on the side, near the carabiner, under a small cover. Open the cover and plug in a USB-C cable. The light glows blue while charging.

[TO BE COMPLETED: time for a full charge and sign that charging is complete]

According to the manufacturer, the alarm lasts up to 12 months on standby.

Our advice

This advice is ours, not the manufacturer’s.

  • Do a test when it arrives, in a place where you will not disturb anyone. Do another one from time to time.
  • Do not set off the siren close to an ear, yours or anyone else’s.
  • Close the USB-C port cover again after charging.
  • Do not immerse the alarm in water. It is rated IPX3 by the manufacturer: it withstands rain, not immersion.

The alarm in figures

Data provided by the manufacturer.

FeatureValue
Siren130 dB
Continuous alarmup to 1 h
LED light40 lumens, up to 5 h
Standbyup to 12 months
ChargingUSB-C
ProtectionIPX3
Weight24 g
Dimensions97 × 29 × 16 mm
MaterialABS

In an emergency

The alarm emits a sound and light signal to attract attention. It does not replace a call to the emergency services: in an emergency, call 117 or 112.

In doubt?

See the frequently asked questions or write to us.